diff --git a/apps/activepedom/ChangeLog b/apps/activepedom/ChangeLog
index 4c21f3ace..fb0bc78e5 100644
--- a/apps/activepedom/ChangeLog
+++ b/apps/activepedom/ChangeLog
@@ -1 +1,2 @@
-0.01: New Widget!
+0.01: New Widget!
+0.02: Distance calculation and display
\ No newline at end of file
diff --git a/apps/activepedom/README.md b/apps/activepedom/README.md
index 8a10727cd..055a91f56 100644
--- a/apps/activepedom/README.md
+++ b/apps/activepedom/README.md
@@ -1,4 +1,4 @@
-# Improved pedometer
+# Active Pedometer
 Pedometer that filters out arm movement and displays a step goal progress.
 
 I changed the step counting algorithm completely.
@@ -19,8 +19,9 @@ When you reach the step threshold, the steps needed to reach the threshold are c
 ## Features
 
 * Two line display
+* Can display distance (in km) or steps in each line
 * Large number for good readability
-* Small number with the exact steps counted
+* Small number with the exact steps counted or more exact distance
 * Large number is displayed in green when status is 'active'
 * Progress bar for step goal
 * Counts steps only if they are reached in a certain time
@@ -29,9 +30,23 @@ When you reach the step threshold, the steps needed to reach the threshold are c
 * Steps are saved to a file and read-in at start (to not lose step progress)
 * Settings can be changed in Settings - App/widget settings - Active Pedometer
 
-## Development version
+## Settings
 
-* https://github.com/Purple-Tentacle/BangleAppsDev/tree/master/apps/pedometer
+* Max time (ms): Maximum time between two steps in milliseconds, steps will not be counted if exceeded. Standard: 1100
+* Min time (ms): Minimum time between two steps in milliseconds, steps will not be counted if fallen below. Standard: 240
+* Step threshold: How many steps are needed to reach 'active' mode. If you do not reach the threshold in the 'Active Reset' time, the steps are not counted. Standard: 30
+* Act.Res. (ms): Active Reset. After how many miliseconds will the 'active mode' reset. You have to reach the step threshold in this time, otherwise the steps are not counted. Standard: 30000
+* Step sens.: Step Sensitivity. How sensitive should the sted detection be? This changes sensitivity in step detection in the firmware. Standard in firmware: 80
+* Step goal: This is your daily step goal. Standard: 10000
+* Step length: Length of one step in cm. Standard: 75
+* Line One: What to display in line one, steps or distance. Standard: steps
+* Line Two: What to display in line two, steps or distance. Standard: distance
+
+## Releases
+
+* Offifical app loader: https://github.com/espruino/BangleApps/tree/master/apps/activepedom (https://banglejs.com/apps)
+* Forked app loader: https://github.com/Purple-Tentacle/BangleApps/tree/master/apps/activepedom (https://purple-tentacle.github.io/BangleApps/#widget)
+* Development: https://github.com/Purple-Tentacle/BangleAppsDev/tree/master/apps/pedometer
 
 ## Requests
 
diff --git a/apps/activepedom/settings.js b/apps/activepedom/settings.js
index 43764a164..94ae435d2 100644
--- a/apps/activepedom/settings.js
+++ b/apps/activepedom/settings.js
@@ -4,6 +4,7 @@
  */
 (function(back) {
   const SETTINGS_FILE = 'activepedom.settings.json';
+  const LINES = ['Steps', 'Distance'];
 
   // initialize with default settings...
   let s = {
@@ -13,6 +14,9 @@
     'intervalResetActive' : 30000,
     'stepSensitivity' : 80,
     'stepGoal' : 10000,
+    'stepLength' : 75,
+    'lineOne': LINES[0],
+    'lineTwo': LINES[1],
   };
   // ...and overwrite them with any saved values
   // This way saved values are preserved if a new version adds more settings
@@ -27,7 +31,7 @@
     return function (value) {
       s[key] = value;
       storage.write(SETTINGS_FILE, s);
-      WIDGETS["activepedom"].draw();
+      //WIDGETS["activepedom"].draw();
     };
   }
 
@@ -76,6 +80,33 @@
       step: 1000,
       onchange: save('stepGoal'),
     },
+    'Step length (cm)': {
+      value: s.stepLength,
+      min: 1,
+      max: 150,
+      step: 1,
+      onchange: save('stepLength'),
+    },
+    'Line One': {
+      format: () => s.lineOne,
+      onchange: function () {
+        // cycles through options
+        const oldIndex = LINES.indexOf(s.lineOne)
+        const newIndex = (oldIndex + 1) % LINES.length
+        s.lineOne = LINES[newIndex]
+        save('lineOne')(s.lineOne)
+      },
+    },
+    'Line Two': {
+      format: () => s.lineTwo,
+      onchange: function () {
+        // cycles through options
+        const oldIndex = LINES.indexOf(s.lineTwo)
+        const newIndex = (oldIndex + 1) % LINES.length
+        s.lineTwo = LINES[newIndex]
+        save('lineTwo')(s.lineTwo)
+      },
+    },
   };
   E.showMenu(menu);
 });
\ No newline at end of file
diff --git a/apps/activepedom/widget.js b/apps/activepedom/widget.js
index 0c8b2438d..d569716ec 100644
--- a/apps/activepedom/widget.js
+++ b/apps/activepedom/widget.js
@@ -8,22 +8,16 @@
   var active = 0; //x steps in y seconds achieved
   var stepGoalPercent = 0; //percentage of step goal
   var stepGoalBarLength = 0; //length og progress bar   
-  var lastUpdate = new Date();
-  var width = 45;
+  var lastUpdate = new Date(); //used to reset counted steps on new day
+  var width = 45; //width of widget
 
-  var stepsTooShort = 0;
+  //used for statistics and debugging
+  var stepsTooShort = 0; 
   var stepsTooLong = 0;
   var stepsOutsideTime = 0;
 
-  //define default settings
-  const DEFAULTS = {
-    'cMaxTime' : 1100,
-    'cMinTime' : 240,
-    'stepThreshold' : 30,
-    'intervalResetActive' : 30000,
-    'stepSensitivity' : 80,
-    'stepGoal' : 10000,
-  };
+  var distance = 0; //distance travelled
+
   const SETTINGS_FILE = 'activepedom.settings.json';
   const PEDOMFILE = "activepedom.steps.json";
   
@@ -32,10 +26,21 @@
   function loadSettings() {
     settings = require('Storage').readJSON(SETTINGS_FILE, 1) || {};
   }
+
   //return setting
   function setting(key) {
-    if (!settings) { loadSettings(); }
-    return (key in settings) ? settings[key] : DEFAULTS[key];
+    //define default settings
+    const DEFAULTS = {
+      'cMaxTime' : 1100,
+      'cMinTime' : 240,
+      'stepThreshold' : 30,
+      'intervalResetActive' : 30000,
+      'stepSensitivity' : 80,
+      'stepGoal' : 10000,
+      'stepLength' : 75,
+    };
+  if (!settings) { loadSettings(); }
+  return (key in settings) ? settings[key] : DEFAULTS[key];
   }
 
   function setStepSensitivity(s) {
@@ -46,7 +51,7 @@
   }
 
   //format number to make them shorter
-  function kFormatter(num) {
+  function kFormatterSteps(num) {
     if (num <= 999) return num; //smaller 1.000, return 600 as 600
     if (num >= 1000 && num < 10000) { //between 1.000 and 10.000
       num = Math.floor(num/100)*100;
@@ -99,11 +104,12 @@
     else {
       stepsOutsideTime++;
     }
+    settings = 0; //reset settings to save memory
   }
 
   function draw() {
     var height = 23; //width is deined globally
-    var stepsDisplayLarge = kFormatter(stepsCounted);
+    distance = (stepsCounted * setting('stepLength')) / 100 /1000 //distance in km
     
     //Check if same day
     let date = new Date();
@@ -121,10 +127,21 @@
     if (active == 1) g.setColor(0x07E0); //green
     else g.setColor(0xFFFF); //white
     g.setFont("6x8", 2);
-    g.drawString(stepsDisplayLarge,this.x+1,this.y);  //first line, big number
+
+    if (setting('lineOne') == 'Steps') {
+      g.drawString(kFormatterSteps(stepsCounted),this.x+1,this.y);  //first line, big number, steps
+    }
+    if (setting('lineOne') == 'Distance') {
+      g.drawString(distance.toFixed(2),this.x+1,this.y);  //first line, big number, distance
+    }
     g.setFont("6x8", 1);
     g.setColor(0xFFFF); //white
-    g.drawString(stepsCounted,this.x+1,this.y+14); //second line, small number
+    if (setting('lineTwo') == 'Steps') {
+      g.drawString(stepsCounted,this.x+1,this.y+14); //second line, small number, steps
+    }
+    if (setting('lineTwo') == 'Distance') {
+      g.drawString(distance.toFixed(3) + "km",this.x+1,this.y+14); //second line, small number, distance
+    }
     
     //draw step goal bar
     stepGoalPercent = (stepsCounted / setting('stepGoal')) * 100;
@@ -136,6 +153,8 @@
     g.fillRect(this.x, this.y+height, this.x+1, this.y+height-1); //draw start of bar
     g.fillRect(this.x+width, this.y+height, this.x+width-1, this.y+height-1); //draw end of bar
     g.fillRect(this.x, this.y+height, this.x+stepGoalBarLength, this.y+height); // draw progress bar
+
+    settings = 0; //reset settings to save memory
   }
 
   //This event is called just before the device shuts down for commands such as reset(), load(), save(), E.reboot() or Bangle.off()
@@ -164,6 +183,7 @@
 
   //Read data from file and set variables
   let pedomData = require("Storage").readJSON(PEDOMFILE,1);
+  
   if (pedomData) {
     if (pedomData.lastUpdate) lastUpdate = new Date(pedomData.lastUpdate);
     stepsCounted = pedomData.stepsToday|0;
@@ -172,6 +192,8 @@
     stepsOutsideTime = pedomData.stepsOutsideTime;
   }
 
+  pedomdata = 0; //reset pedomdata to save memory
+
   setStepSensitivity(setting('stepSensitivity')); //set step sensitivity (80 is standard, 400 is muss less sensitive)
 
   //Add widget